Cisco D9854 Installation And Operation Manual page 162

Diagnostics Menu,
CHANNELS
Channels
This is the Virtual Channel sub-menu. You cannot make any changes here, but you
can view the available channels and their settings. The following is a list of the
expanded abbreviations:
VC - Virtual Channel
TxID - Transport ID
PMT - Program Map Table
ECM - Entitlement Control Message
Program Name - Name of the program
TABLES
PSI Tables
This is the Tables received sub-menu. You cannot make any changes here, but you
can view the PSI tables received and their settings. The following is a list of the
expanded abbreviations:
Type - Table Type (i.e., NIT, PMT, etc.)
Tbl-ID - Unique Table ID
ID - MPEG/DVB Table ID
Ver - Table Version number
PID - Program PID number
Status - Reception status
Sections - PSI tables are received in sections. This indicates the section number
received. This information is useful for diagnostics/troubleshooting purposes.
POWER ON
Creation Date and Time
Description:
Power On Date and Time
Description:
Total Hrs, Hrs Since Last Pwoff
Description:
4-100 Model D9854 Advanced Program Receiver Installation and Operation Guide
Continued
Displays the date and time when the receiver was manufactured.
Displays the date and time when the receiver was powered up.
Displays the total numbers of hours (Total Hrs) that the receiver has
been operating, and the number of hours since the last power-off
(Hrs Since Last Pwoff).
4021470 Rev D