Cisco D9854 Installation And Operation Manual page 122

Setup Menu: CI,
Stream
Description:
Parameters:
Type
Description
Parameters:
Inst
Description:
Parameters:
Query
Description:
Parameters:
Auto Reset
Description:
Parameters:
List Mgmt
Description:
Parameters:
TS_ON_ID
Description:
Parameters:
TS_ID
Description:
Parameters:
4-60 Model D9854 Advanced Program Receiver Installation and Operation Guide
Continued
Set the stream category if the PID value is unknown.
Set to User if you want to manually enter a stream code for the
stream type.
Aud (audio), Vid (video), Subtitle (subt), TTX, User.
If you selected User in the Stream parameter, you can manually
enter the stream type value.
0 to 255 bytes.
Set the instance of the selected stream.
1 to 64.
Set to Enable to query the CAM prior to decryption to ensure that
the program can be decrypted.
Enabled or Disabled (default).
Set to Enable to automatically reset the card.
Enable or Disabled (default).
Set to AddDel (default) to add or delete programs individually in
the CAM.
Set to Update All to automatically update and reset all the
programs each time you add or modify the programs available via
the CAM.
AddDel or Update All.
Set to Enable if you want to restrict the incoming transport stream.
If the incoming stream does not match the transport stream and
original network ID specified (TS_ID and ON_ID), the program will
not be decrypted.
Enable or Disable (default).
Specify the Transport ID.
0 to 65535
4021470 Rev D