Cisco D9854 Installation And Operation Manual page 178

Frequency (GHz)
LBand (MHz)
Symbol Rate (MSps)
FEC
Polarization
Modulation
I/Q
PVBer
C/N (dB)
C/N Margin (dB)
Corrected Errors
Uncorrected Errors
LNB Status
5-14 Model D9854 Advanced Program Receiver Installation and Operation Guide
Parameter
The current downlink frequency, in GHz.
The current L-Band frequency, in MHz.
Symbol rate of the received signal, in Msymbols/
second.
The FEC (Forward Error Correction) rate of the
received signal (N/A, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6,
7/8, 8/9 or 9/10).
The signal polarization setting. This setting is only
applicable when LNB Power is set to H-NIT or V-
NIT. The selected setting must match the
polarization of the transmitted signal. The
parameters are: Horiz (Horizontal), Vert (Vertical)
or Auto.
The modulation type for the received signal (N/A,
QPSK, 8PSK, DVB-S or DVB-S2).
The IQ (Input Signal Inversion) for the received
signal (Inv or NonInv).
The PV (Post-Viterbi) BER for the received signal
(DVB-S).
Current Carrier-to-Noise ratio, in dB.
Current Carrier-to-Noise Margin for the received
signal. The Carrier-to-Noise margin is the actual
distance that C/N is from the noise threshold.
Values can be displayed in the range of -32.0 to
+30.0 dB.
Current Corrected Error Count for the received
signal.
Current Uncorrected Error Count for the received
signal.
Current LNB connection status (No Load,
Overloaded, OverTemp, Short Circuit, Disabled,
Normal or N/A).
Description
4021470 Rev D