Viewing The Audio Status - Cisco D9854 Installation And Operation Manual

Viewing the Audio Status

To View the Audio Status
Proceed as follows to view the Audio Status page:
From the user interface of the D9854, click the Status tab, expand Services, and then
click Audio icon from the sub-page.
The following table describes the Audio Status information displayed:
Source
Audio Format
Bit Rate (Kbps)
Buffer Level (Bytes)
Sampling Frequency
(Hz)
5-20 Model D9854 Advanced Program Receiver Installation and Operation Guide
Audio Status
The audio channel within the stream when the
signal contains more than two audio pairs.
AUD1 for audio channel Aud1.
AUD2 for audio channel Aud2.
AUD1 to AUD4 for two stereo audio channels.
The received audio channel format (MPEG, AC3,
AAC, HEAAC or DDP).
Audio bit rate of the received audio channel, in
kbps.
The audio input buffer level, in bytes.
The audio sampling frequency (32, 44.1, or 48 Hz).
Description
4021470 Rev D