Cisco D9854 Installation And Operation Manual page 145

Setup Menu: Outputs: TS Out: DPM,
SIT
ECM
EMM
DRT
CDT
10. Press MENU three times to exit the TS Out menu and save the data. If the
changes cannot be saved/made, a message will be displayed indicating "Bad
configuration data". The following options are available: Abandon, Exit or
Return. Select Return to re-enter the parameter.
Note: When remapping an input program channel to an output channel, ensure
that the PIDs are mapped to different PIDs to avoid PID collisions.
PE Resync: All, Template, PIDs, Svcs
Description:
Parameters:
4021470 Rev D D9854 Advanced Program Receiver Installation and Operation Guide
Continued
Parameter
Each PE output can be synchronized to its input according to one of
four output modes.
Services only (Svcs), PIDS only (PIDs), using a Template or All
(Services and PIDS).
Description
Pass
Drop
Drop
Drop
Drop
4-83