Section A - Rack Installation; General - Cisco D9854 Installation And Operation Manual

General

Power Connection
To operate the receiver, you must connect it to an AC power source. For
information about connecting the chassis to AC power, see Appendix A - Technical
Specifications.
As Cisco units are designed for continuous operation, some products do not have a
power switch. In this case the mains cord and/or DC power supply cable serve(s) as
the mains disconnect device.
WARNING:
Make sure that at least one end of the power cable(s) remains easily accessible
for unplugging, if you need to switch off the unit. For example: Ensure that the
socket outlet is installed near the product.
WARNING:
To avoid electrical shock, connect the three-prong plug on this product to an
earth-grounded three-pin socket outlet only.
4021470 Rev D D9854 Advanced Program Receiver Installation and Operation Guide

Section A - Rack Installation

3-3