Cisco D9854 Installation And Operation Manual page 83

Status Menu: TS Input,
Net Name
Description:
Parameters:
NetID
Description:
Parameters:
TxID
Description:
Parameters:
LNB Stat
Description:
Parameters:
Polar
Description:
Parameters:
LO Select
Description:
Parameters:
PROGRAM PIDS
PE
Description:
Parameters:
Stream
Description:
Parameters:
4021470 Rev D D9854 Advanced Program Receiver Installation and Operation Guide
Continued
Indicates the name assigned to the network.
Up to 12 alphanumeric characters.
Indicates the Network ID of the uplink signal the receiver is to
receive when using the selected preset. The receiver's Network ID
must match the Network ID associated with the transmitted signal
that identifies the NIT to be used.
Note: Each network must be assigned a unique ID (number).
1 to 65535.
Indicates the Transport ID.
1 to 65535.
Indicates the current LNB connection status.
No Load, Overloaded, OverTemp, Short Circuit, Disabled, Normal
or N/A.
Indicates the polarity of the received signal.
H (Horizontal), V (Vertical) or Off.
Indicates whether a 22 kHz tone is available on input port RF1. This
is applicable for dual-band applications.
On or Off.
Indicates the Program Entry number.
PE1 to PE16.
Indicates the name assigned to the Program Entry.
Up to 4 alphanumeric characters.
4-21