Cisco D9854 Installation And Operation Manual page 222

Setting up the Video Service,
7. Select the Wide Screen Signalling output mode. It is used to select how the
receiver affects PAL WSS when it is present in the VBI. The table below
describes each of the options. The default is Auto.
WSS Mode
Passthrough
Auto:Create
Auto:Modify
Suppress
8. The Incoming Stream section indicates the encoding, bit rate, FPS and aspect
ratio of the incoming signal. The fields are read-only.
9. Click Save.
5-58 Model D9854 Advanced Program Receiver Installation and Operation Guide
Continued
Passes WSS (unmodified, as received by the D9854
receiver) on VBI LIne 23 when present
Creates WSS to output the correct aspect ratio, when
performing aspect ratio conversion, otherwise it is
passed through.
Modifies WSS to output the correct aspect ratio, when
performing aspect ratio conversion, otherwise it is
passed through
Disables Line 23 VBI processing. WSS is not output on
line 23.
Description
4021470 Rev D