Using Wizard For Basic Configuration - HIKVISION iDS-9632NXI-I8/16S User Manual

Step 2 Select the GUID file from the U flash disk and click Import to import the file to the device.
If you have imported the wrong GUIE file for 7 times, you will be not allowed to reset the password
for 30 minutes.
Step 3 After the GUID file is successfully imported, enter the reset password interface to set the
new admin password. Refer to Chapter 2.1.2 Activating Your Device for details.
Step 4 Click OK to set the new password. You can export the new GUID file to the U flash disk for
future password resetting.
When the new password is set, the original GUID file will be invalid. The new GUID file should be
exported for future password resetting. You can also enter the User>User Management interface to
edit the admin user and export the GUID file.

2.2 Using Wizard for Basic Configuration

The Setup Wizard can walk you through some basic settings of the device. By default, the Setup
Wizard starts once the NVR has loaded.
Network Video Recorder User Manual
Figure 2-14 Reset Password
33