Table of Contents
Advertisement
User Manual of Network Video Recorder
2.3 Using the Wizard for Basic Configuration
By default, the Setup Wizard starts once the NVR has loaded, as shown in Figure 2. 4.
Operating the Setup Wizard:
1. The Setup Wizard can walk you through some important settings of the NVR. If you don't want to use the
Setup Wizard at that moment, click the Cancel button. You can also choose to use the Setup Wizard next
time by leaving the "Start wizard when the device starts?" checkbox checked.
2. Click Next button to enter the date and time settings window, as shown in Figure 2. 5.
3. After the time settings, click Next button which takes you back to the Network Setup Wizard window, as
shown in the following figure.
Figure 2. 4 Start Wizard Interface
Figure 2. 5 Date and Time Settings
24
Advertisement
Table of Contents
