Using The Wizard For Basic Configuration - HIKVISION DS-7100NI-K1 Series User Manual

Select the GUID file from the U-flash disk and click Import to import the file to the
device.
If you have imported the wrong GUID file for 7 times, you will be not allowed to reset
the password for 30 minutes.
After the GUID file is successfully imported, enter the reset password interface to
set the new admin password.
Click OK to set the new password. You can export the new GUID file to the U-flash
disk for future password resetting.
When the new password is set, the original GUID file will be invalid. The new GUID
file should be exported for future password resetting. You can also enter the
User>User Management interface to edit the admin user and export the GUID file.
Use the Wizard for Basic Configuration
The Setup Wizard can guide you to configure the system resolution, system
date/time, HDD initialization, IP camera management, etc.
If you don't want to use the setup wizard at that moment, click Exit. You can also
choose to use the Setup Wizard next time by leaving the "Start wizard when the
device starts?" checkbox checked.
Enter the general settings interface to configure the VGA/HDMI resolution,
system date and time, and HDD initialization.
Initialize HDD: check it to initialize the HDD which it is used for the first time.
Network Video Recorder User Manual
24