Managing Esata; Configuring Quota Mode - HIKVISION DS-7200HGHI-SH Series User Manual

Managing eSATA

When there is an external eSATA device connected to DVR, you can configure eSATA for the
ues of Record/Capture or Export. To manage eSATA:
1. Enter the HDD menu by going to Menu > System Configuration > HDD.
2. Select the Record Information tab, as shown in Figure 158.
3. Select the eSATA Usage to Record/Capture or Export from the dropdown list.

Export: Use the eSATA for backup.

Record/Capture: Use the eSATA for record/capture.
4. Click the Apply button to save the settings.

Configuring Quota Mode

Each camera can be configured with allocated quota for record or picture capture.
To configure quota mode:
1. Enter the quota mode menu by going to Menu > System Configuration > HDD.
2. Select the Storage Mode tab, as shown in Figure 159.
Figure 159 Quota Mode Settings Menu
3. Select the Mode to Quota.
4. Select a camera for which you want to configure quota.
5. Enter the storage capacity in the text fields of Max. Record Capacity (GB) and Max.
Picture Capacity (GB).
6. If the same settings can be applied in other channels, click Copy.
7. Click the Apply button to save the settings.
Note:
If the quota capacity is set to 0, then all cameras will use the total capacity of HDD for record
and picture capture.
129