Managing Esata - HIKVISION DS-96128NI-E16 User Manual

User Manual of Network Video Recorder

11.3 Managing eSATA

Purpose:
When there is an external eSATA device connected to NVR, you can configure eSATA for the use of Record or
Export, and you can manage the eSATA in the NVR.
Steps:
1.
Enter the Advanced Record Settings interface.
Menu >Record>Advanced
2. Select the eSATA type to Export or Record from the dropdown list of eSATA.
Export: use the eSATA for backup. Refer to Backup using eSATA HDDs in Chapter Backing up by Normal
Video Search for operating instructions.
Record: use the eSATA for record. Refer to the following steps for operating instructions.
3. When the eSATA type is selected to Record, enter the HDD Information interface.
Menu > HDD>General
4. Edit the property of the selected eSATA, or initialize it is required.
Two storage modes can be configured for the eSATA when it is used for Record. Please refer to Chapter Managing
HDD Group and Chapter Configuring Quota Mode for details.
Figure 11. 11 Set eSATA Mode
Figure 11. 12 Initialize Added eSATA
168