Configuring Multicast Address - HIKVISION DeepinMind iDS-6700NXI Series User Manual

 Hik-Connect is disabled by default.
 The verification code is empty when the device leaves factory.
 The verification code must contain 6 to 12 letters or numbers and is case sensitive.
 Every time you enable Hik-Connect, the Service Terms page pops up and you should read
Terms of Service and Privacy Policy before enabling it.
Step 3 If you want to customize the server, enable Custom and enter the Server Address in the text
field.
Step 4 Click Save.
After configuration, you can access and manage the encoder by your mobile phone on which the
Hik-Connect application is installed or by the website (www.hik-connect.com).
Please refer to the help file on the official website (www.hik-connect.com) and the Hik-Connect
Mobile Client User Manual for adding the device to Hik-Connect and more operation instructions.

4.3.9 Configuring Multicast Address

The multicast address can be configured to realize live view for more than the maximum number of
cameras through network.
A multicast address spans the Class-D IP range of 224.0.0.0 to 239.255.255.255. It is recommended
to use the IP address ranging from 239.252.0.0 to 239.255.255.255.
Step 1 Go to Configuration > Network > Advanced Settings > Other to enter the multicast address
settings interface.
DeepinMind Series NVS User Manual
Figure 4-19 Hik-Connect Settings
41
iDS-67 00 Deep inMind Ser ies NVS User Manua l