Event Log Messages - HP ProCurve Management And Configuration Manual

Redundancy (Switch 8212zl)

Event Log Messages

# System Message
62 Mgmt module [1 or 2] went down
without saving crash information
63 Mgmt module [1 or 2] went down
260 Mgmt Module [1 or 2] Active
261 Mgmt Module [1 or 2] in Standby Mode info
262 Mgmt Module [1 or 2] Failed -
Synchronization Failed
263 Mgmt Module [1 or 2] Offline
(redundancy disabled)
264 Mgmt Module [1 or 2] Failed Selftest
265 Lost Communication with Mgmt Module
[1 or 2]
266 Resetting Mgmt Module [1 or 2]
267 Mgmt Module [1 or 2] - Running
different version of SW
15-46
Event Log Messages
Severity
info
info
info
warn
info
warn
warn
info
info
Description
The specified management module went down
without saving the crash information.
RMON_BOOT_NO_CRASH_RECORD
The specified management module was rebooted.
RMON_BOOT_CRASH_RECORD0
The specified management module is the active
management module
RMON_SYSTEM_MGMT_MOD_ACTIVE
The specified management module is in standby
mode.
RMON_SYSTEM_MGMT_MOD_STANDBY
Synchronization failed on the indicated
management module.
RMON_SYSTEM_MGMT_FAILED_SYNC
The no redundancy management-module
command was issued and the specified
management module went offline.
RMON_SYSTEM_MGMT_OFFLINE
The specified management module failed selftest
and will not become an active or standby module.
RMON_SYSTEM_MGMT_FAILED
A management module failed to receive heartbeats
from the other management module.
RMON_SYSTEM_MGMT_LOST_COMM
The specified management module is being reset.
This can occur if you perform a boot standby
command or for other reasons when an individual
module is rebooted.
RMON_SYSTEM_MGMT_RESET
The specified management module is running a
different version of software from the other
management module.
RMON_SYSTEM_MGMT_OS_DIFF