Web: Viewing Port Status And Configuring Port Parameters; Using Friendly (Optional) Port Names; Configuring And Operating Rules For Friendly Port Names - HP ProCurve Management And Configuration Manual

Port Status and Configuration

Using Friendly (Optional) Port Names

10-18
Web: Viewing Port Status and Configuring Port
Parameters
In the web browser interface:
1. Click on the Configuration tab.
2. Click on [Port Configuration].
3. Select the ports you want to modify and click on [Modify Selected Ports].
4. After you make the desired changes, click on [Apply Settings].
Note that the web browser interface displays an existing port trunk group.
However, to configure a port trunk group, you must use the CLI or the menu
interface. For more on this topic, refer to Chapter 12, "Port Trunking" .
Using Friendly (Optional) Port Names
Feature
Configure Friendly Port Names
Display Friendly Port Names
This feature enables you to assign alphanumeric port names of your choosing
to augment automatically assigned numeric port names. This means you can
configure meaningful port names to make it easier to identify the source of
information listed by some Show commands. (Note that this feature augments
port numbering, but does not replace it.)
Configuring and Operating Rules for Friendly Port
Names
■ At either the global or context configuration level you can assign a unique
name to a port. You can also assign the same name to multiple ports.
Default Menu
Standard Port n/a
Numbering
n/a n/a
CLI Web
page 19 n/a
page 20 n/a