Viewing The Current Configuration - HP ProCurve Management And Configuration Manual

Configuring for Network Management Applications
LLDP (Link-Layer Discovery Protocol)
Figure 14-16. Example of Viewing the General LLDP Configuration
14-42

Viewing the Current Configuration

Displaying the Global LLDP, Port Admin, and SNMP Notification
Status. This command displays the switch's general LLDP configuration
status, including some per-port information affecting advertisement traffic
and trap notifications.
Syntax show lldp config
Displays the LLDP global configuration, LLDP port status, and
SNMP notification status. For information on port admin
status, refer to "Configuring Per-Port Transmit and Receive
Modes" on page 14-48.
For example, show lldp config produces the following display when the switch
is in the default LLDP configuration:
Note: This value corresponds to
the lldp refresh-interval
command (page 14-44).
Med Topology Trap Enabled
-------------------------
False
True
False
False
True
False
False