Overview Page; Redundancy Status Page - HP ProCurve Management And Configuration Manual

Figure 15-27. Overview Page Showing the SystemUp Time for Both Management Modules

Overview Page

To view status information about the management modules select the Status
tab, and then the Overview button. The following information is shown:
■ Which module is the active module and which is the standby module
Version of software running on each management module
■
The SystemUp Time since the last reboot.
■

Redundancy Status Page

The Redundancy Status tab is visible only if the alternate management
module (non-active module) is in standby mode. Select the Status tab and
then the Redundancy Status button. The Redundancy Status page displays
information about the active and standby management modules and the two
fabric modules.
Redundancy (Switch 8212zl)
Using the Web Browser for Redundant Management
15-37