Management Module Led Behavior; Active (Actv) Led Behavior - HP ProCurve Management And Configuration Manual

Redundancy (Switch 8212zl)

Management Module LED Behavior

15-40
Management Module LED Behavior

Active (Actv) LED Behavior

The Actv (Active) LED shows the LED behavior for various states on the active
and standby management modules. See Table 15-2 for the available states and
what they indicate. Refer to the Installation and Getting Started Guide for
your switch for more information about LEDs.
Figure 15-30. The Actv LED on the Management Module
Table 15-2. Actv (Active) LED Behavior for Management Modules
Active Module Actv LED
Solid green
Not lit
Not lit
Standby Module Actv LED
Not lit
Flashing green
Solid green
Meaning
Correct Active/Standby
mode
Standby module is starting
to take over
Switchover is complete