Menu: Viewing And Configuring Timep - HP ProCurve Management And Configuration Manual

Time Protocols
TimeP: Viewing, Selecting, and Configuring
Figure 9-12. The System Information Screen (Default Values)
9-16

Menu: Viewing and Configuring TimeP

To View, Enable, and Modify the TimeP Protocol:
1. From the Main Menu, select:
2. Switch Configuration...
1. System Information
Press [E] (for Edit). The cursor moves to the System Name field.
2. Use [v] to move the cursor to the Time Sync Method field.
3. If TIMEP is not already selected, use the Space bar to select TIMEP, then
press [v] once to display and move to the TimeP Mode field.
4. Do one of the following:
Use the Space bar to select the DHCP mode, then press
•
the cursor to the Poll Interval field, and go to step 6.
Time Protocol Selection Parameter
– TIMEP (the default)
– SNTP
– None
[v]
to move