Viewing Port Utilization Statistics; Viewing Transceiver Status - HP ProCurve Management And Configuration Manual

Table of Contents

Advertisement

ProCurve(config)# show interfaces port-utilization
Status and Counters - Port Utilization
Port
Mode
--------- -------- + ---------- ---------- ----- + ---------- ---------- -----
B1
1000FDx
B2
1000FDx
B3
1000FDx
B4
1000FDx
B5
1000FDx
B6
1000FDx
B7
100FDx
Figure 10-5. Example of a Show Interface Port-Utilization Command Listing

Viewing Port Utilization Statistics

Use the show interface port-utilization command to view a real-time rate display
for all ports on the switch. The following shows a sample output from this
command.
Rx
| --------------------------- | ---------------------------
| Kbits/sec
Pkts/sec
| 0
0
| 0
0
| 0
0
| 0
0
| 0
0
| 0
0
| 624
86
Operating Notes:
For each port on the switch, the command provides a real-time display
of the rate at which data is received (Rx) and transmitted (Tx) in terms
of kilobits per second (KBits/s), number of packets per second (Pkts/
s), and utilization (Util) expressed as a percentage of the total band­
width available.
The show interfaces <port-list> command can be used to display the
current link status and the port rate average over a 5 minute period.
Port rates are shown in bits per second (bps) for ports up to 1 Gigabit;
for 10 Gigabit ports, port rates are shown in kilobits per second
(Kbps).

Viewing Transceiver Status

The show tech transceivers command allows you to:
Remotely identify transceiver type and revision number without having
to physically remove an installed transceiver from its slot.
Display real-time status information about all installed transceivers,
including non-operational transceivers.
Port Status and Configuration
Viewing Port Status and Configuring Port Parameters
Util
| Kbits/sec
0
| 0
0
| 0
0
| 0
0
| 0
0
| 0
0
| 0
00.62 | 496
Tx
Pkts/sec
Util
0
0
0
0
0
0
0
0
0
0
0
0
0
00.49
10-9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Procurve 8200zl

Table of Contents