HP ProCurve Management And Configuration Manual page 375

ProCurve# show sflow 2 destination
Destination Instance
sflow
Datagrams Sent
Destination Address
Receiver Port
Owner
Timeout (seconds)
Max Datagram Size
Datagram Version Support
Figure 14-14. Example of Viewing sFlow Destination Information
The show sflow <instance> destination command includes information about
the management-station's destination address, receiver port, and owner.
2
Enabled
221
10.0.10.41
6343
Administrator, CLI-owned, Instance 2
99995530
1400
5
Note the following details:
■ Destination Address remains blank unless it has been configured.
■ Datagrams Sent shows the number of datagrams sent by the switch
agent to the management station since the switch agent was last
enabled.
Timeout displays the number of seconds remaining before the switch
■
agent will automatically disable sFlow (this is set by the management
station and decrements with time).
Max Datagram Size shows the currently set value (typically a
■
default value, but this can also be set by the management station).
The show sflow <instance> sampling-polling [port-list] command displays infor­
mation about sFlow sampling and polling on the switch. You can specify a list
or range of ports for which to view sampling information.
Configuring for Network Management Applications
Using SNMP Tools To Manage the Switch
14-31