HP ProCurve Management And Configuration Manual page 228

Port Status and Configuration
Viewing Port Status and Configuring Port Parameters
ProCurve(config)# show interfaces brief
Status and Counters - Port Status
Port Type
----- --------- + --------- ------- ------ ----------
B1 100/1000T | No
B2 100/1000T | No
B3 100/1000T | No
B4 100/1000T | No
B5 100/1000T | No
B6 100/1000T | No
Figure 10-3. Example of Show Interfaces Brief Command Listing
10-8
| Intrusion
| Alert Enabled Status Mode
Yes
Yes
Yes
Yes
Yes
Yes
Use the show interfaces config command to view the port settings, as shown
below.
ProCurve(config)# show interfaces config
Port Settings
Port Type
----- --------- + ------- ------------ --------- ----
B1 100/1000T | Yes
B2 100/1000T | Yes
B3 100/1000T | Yes
B4 100/1000T | Yes
B5 100/1000T | Yes
B6 100/1000T | Yes
Figure 10-4. Example of a Show Interfaces Config Command Listing
Down Auto-10-100 Auto
Down 1000FDx
Down 1000FDx
Down 1000FDx
Down 1000FDx
Down 1000FDx
| Enabled Mode
Auto-10-100
Auto
Auto
Auto
Auto
Auto
MDI Flow Bcast
Mode Ctrl Limit
----- ----- ------
off 0
Auto off 0
Auto off 0
Auto off 0
Auto off 0
Auto off 0
Flow Ctrl MDI
Disable Auto
Disable Auto
Disable Auto
Disable Auto
Disable Auto
Disable Auto