Configuring for Network Management Applications
Using SNMP Tools To Manage the Switch
ProCurve(config)# show snmp-server
SNMP Communities
Community Name
---------------- -------- ------------
public
Trap Receivers
Link-Change Traps Enabled on Ports [All] : All
Send Authentication Traps [No] : No
Address
--------------------- --------------- ----------- ----------- ----- --------
15.28.333.456
Excluded MIBs
Snmp Response Pdu Source-IP Information
Selection Policy
Trap Pdu Source-IP Information
Figure 14-12. Example Showing SNMP Inform Option Enabled
14-28
MIB View Write Access
Manager
Unrestricted
Community
guest
: Default rfc1517
Advanced Management: RMON
The switch supports RMON (Remote Monitoring) on all connected network
segments. This allows for troubleshooting and optimizing your network.
The following RMON groups are supported:
■
Ethernet Statistics (except the numbers of packets of different frame sizes)
Alarm
■
History (of the supported Ethernet statistics)
■
Event
■
The RMON agent automatically runs in the switch. Use the RMON
management station on your network to enable or disable specific RMON
traps and events. Note that you can access the Ethernet statistics, Alarm, and
Event groups from the ProCurve Manager network management software. For
more on ProCurve Manager, visit the ProCurve Networking web site at
Click on products index, then look for the ProCurve Manager topic under the
Network Manager bar.
Events Sent Notify Type Retry Timeout
All
inform
www.procurve.com
3
15