Rebooting The Switch - HP ProCurve Management And Configuration Manual

Using the Menu Interface

Rebooting the Switch

Reboot Switch option
3-12
Rebooting the Switch
Rebooting the switch from the menu interface
■ Terminates all current sessions and performs a reset of the operating
system
Activates any menu interface configuration changes that require a reboot
■
■ Resets statistical counters to zero
(Note that statistical counters can be reset to zero without rebooting the
switch.)
To Reboot the switch, use the Reboot Switch option in the Main Menu. (Note
that Reboot Switch is not available if you log on in Operator mode; that is, if
you enter an Operator password instead of a manager password at the
password prompt.)
Figure 3-6. The Reboot Switch Option in the Main Menu