Audio; Figure 6-5 Audio Confidence Test Form - Silicon Graphics IRIS Indigo Owner's Manual

Chapter 6: Troubleshooting
122
• digitizer tablet
• genlock
• Spaceball
If you run the confidence tests and you find one of the devices is faulty, follow the
instructions in "Ordering Replacement Parts" on page 135 to order a replacement part.
Then contact your service provider for further instructions.

Audio

If you are running an audio application and you do not hear the audio output, first make
sure all cables are connected properly. Then use the confidence test to make sure the
audio is functioning properly.
To test audio, follow these steps:
1. From the System toolchest, choose "Run Confidence Tests." You see the Confidence
Tests form, as shown in Figure 6-4.
2. Select the Audio icon and click Open or double-click the icon.
You see the form shown in Figure 6-5. The Audio Control Panel is also displayed.
Figure 6-5 Audio Confidence Test Form
3. Follow the instructions on the form.