Silicon Graphics IRIS Indigo Owner's Manual page 112

Chapter 5: Installing and Removing Software
96
When the notifier appears asking you to insert the CD, click Continue.
If you see error messages after you insert the CD and click the Continue
Note:
button, see "System Cannot Find the New Software" on page 105.
8. When the system finds the software, it takes several minutes to copy the software
installation tools onto your system. The system is ready to install software when
you see the inst menu:
1. from [source]
2. list [keywords] [names]
3. go
4. install [keywords] [names]
5. remove [keywords] [names]
6. keep [keywords] [names]
7. step [keywords] [names]
8. versions [args]
9. help [topic]
10. admin
11. quit
Inst>
9. Install all or some of the subsystems that make up the operating system.
To install all of the default subsystems, type:
go
To install all optional and required subsystems that are available on the CD,
type:
install all
go
Usually you do not want to install all subsystems, as they occupy a very
Note:
large amount of disk space. See the online release notes for product sizes.
To select only required subsystems or to select all required subsystems plus
some optional subsystems, see "Choosing Subsystems to Install or Remove" on
page 102.
If you see an error message that says the system cannot find the software, see
"System Cannot Find the New Software" on page 105. If you see any other
messages, see "System Cannot Complete an Installation" on page 106. The
installation is complete when you see this message: