Turning On The Iris Indigo Workstation; Figure 2-14 Turning On The Power Switch - Silicon Graphics IRIS Indigo Owner's Manual

Turning On the IRIS Indigo Workstation

Once you've connected all the pieces, as described in the last section, power up IRIS
Indigo by following these steps:
1. Turn on the power.
Turn on the monitor's power switch.
The monitor's power switch is on the front of the monitor in the lower right corner.
The LED next to the switch lights up when you turn on the system's power.
Turn on the system's power switch.
The workstation's power switch is on the back of the chassis, as shown in
Figure 2-14.
O
Figure 2-14 Turning on the Power Switch
Turning On the IRIS Indigo Workstation
25