SmartStor NS4300N Product Manual
Managing the System
This category includes the following topics:
•
Setting System Date and Time (page 100)
•
Adjusting for Daylight Saving Time (page 100)
•
Running the Network Time Protocol (page 101)
•
Viewing the Results of NTP Synchronization (page 101)
•
Rebooting the SmartStor (page 102)
•
Shutting Down the SmartStor (page 103)
•
Restarting the SmartStor (page 103)
•
Locating the SmartStor (page 103)
•
Viewing System Information (page 104)
•
Viewing Enclosure Information (page 104)
Setting System Date and Time
To set the date and time on the SmartStor:
1.
In the Tree, click the + beside the System icon.
2.
Click the Date / Time icon.
3.
Click the Setup tab.
4.
From the dropdown menus, choose the time and date values.
5.
Click the OK button.
Adjusting for Daylight Saving Time
To adjust the SmartStor's clock for daylight saving time:
1.
In the Tree, click the + beside the System icon.
2.
Click the Date / Time icon.
3.
Click the Time Zone tab.
4.
Check the Adjust clock for daylight saving changes box.
5.
From the dropdown menu, choose the increment for daylight saving time in
your location.
6.
Click the OK button.
100