Cmos Battery; Replacing The Cmos Battery - Fujitsu PRIMERGY RX1330 M5 Upgrade And Maintenance Manual

System board and components
● iRMC microSD card
The iRMC microSD card is necessary for using the embedded Lifecycle
Management (eLCM) functionality of the iRMC.
● M.2 SSD
The system board offers two M.2 slots (Key M) with support 80 mm and
110 mm long M.2 SSDs. With the M.2 SSD an internal SSD is offered. This
SSD can be configured as a boot device or data storage device.
● Dual microSD 64GB Enterprise
The system board is optionally equipped with a Dual microSD 64GB
Enterprise. The Dual microSD 64GB Enterprise offers an Integrated
Hardware RAID solution based on RAID-on-Chip (ROC) technology.
15.3

CMOS battery

15.3.1

Replacing the CMOS battery

Upgrade and Repair Unit
(URU)
Tools:
tool-less
For this server the battery type CR2450 is used.
CAUTION
▶
The CMOS battery must be replaced with an identical battery or
with a battery type recommended by the manufacturer.
▶
Keep lithium batteries away from children.
▶
Do not throw batteries into the trash can. Lithium batteries must be
disposed of in accordance with local regulations concerning special
waste.
▶
For more safety information, see "Environmental protection" in the
operating manual of your server.
292 Upgrade and Maintenance Manual
Hardware: 5 minutes
RX1330 M5