Configuring Vlan Settings - Cisco RV315W Administration Manual

Port Management
Configuring LAN
STEP 3
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Cisco RV315W Broadband Wireless VPN Router Administration Guide
• Lease Time: Enter the maximum connection time that a dynamic IP address
is "leased" to a network user. When the time elapses, the user is
automatically renewed the dynamic IP address. The default value is 1 day.
• Default Gateway: Enter the IP address for default gateway.
• DNS Agent: Check Enable to enable the DNS agent feature, or check
Disable to disable this feature.
• DNS1: Enter the IP address of the primary DNS server.
• DNS2: Optionally, enter the IP address of the secondary DNS server.
• Address Reservation: Check Enable to allow you to reserve some IP
addresses of the DHCP pool for specific hosts, or check Disable to disable
this feature. If you enable this feature, enter the following information:
- Host Name: Enter the name of the host for identification.
- Reserved IP Address: Enter the IP address that you want to reserve for
the specific host.
- MAC Address: Enter the MAC address of the host.
Click Add to add it in the list of the Reserved Hosts.
Click OK to apply your settings.

Configuring VLAN Settings

Use the VLAN Settings page to create new VLANs and assign physical LAN ports
to the specified VLANs.
To create a new VLAN:
Click Port Settings > LAN > VLAN Settings. The VLAN Settings page opens.
To create a new VLAN, click Create and enter a unique identification number for
the VLAN in the VLAN ID field. The VLAN1 and VLAN2 are reserved.
In the VLAN Settings area, assign physical LAN ports to the specified VLAN.
Click OK to apply your settings.
To edit the settings of the VLAN, select the VLAN from the drop-down menu, and
then change the physical ports that are mapped to the VLAN. To delete a VLAN,
4
42