About Disabling Fspf For Specific Interfaces; Disabling Fspf For Specific Interfaces; Clearing Fspf Counters For An Interface - Cisco Nexus 5500 Series NX-OS Configuration Manual

FSPF Interface Configuration

About Disabling FSPF for Specific Interfaces

You can disable the FSPF protocol for selected interfaces. By default, FSPF is enabled on all E ports and TE
ports. This default can be disabled by setting the interface as passive.
Note FSPF must be enabled at both ends of the interface for the protocol to work.

Disabling FSPF for Specific Interfaces

You can disable the FSPF protocol for selected interfaces. By default, FSPF is enabled on all E ports and TE
ports. This default can be disabled by setting the interface as passive.
Note FSPF must be enabled at both ends of the interface for the protocol to work.
Procedure
Step 1
Step 2
Step 3
Step 4

Clearing FSPF Counters for an Interface

You can clear the FSPF statistics counters for an interface.
Cisco Nexus 5500 Series NX-OS SAN Switching Configuration Guide, Release 7.x
176
Command or Action
configure terminal
Example:
switch# configure terminal
switch(config)#
switch(config)# interface fc slot/port
fspf passive vsan vsan-id
Example:
switch(config-if)# fspf passive vsan
24
no fspf passive vsan vsan-id
Example:
switch(config-if)# no fspf passive
vsan 23
Configuring Fibre Channel Routing Services and Protocols
Purpose
Enters global configuration mode.
Configures a specified interface, or if already
configured, enters configuration mode for the
specified interface.
If this is a QSFP+ GEM, the slot/port
Note
syntax is slot/QSFP-module/port.
Disables FSPF for the specified interface in the
specified VSAN.
Reenables FSPF for the specified interface in the
specified VSAN.
OL-30895-01