Show Qos Maps - Cisco 4500M Command Reference Manual

Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches

show qos maps

To display QoS map information, use the show qos maps command.
Syntax Description
cos
dscp
policed
tx-queue
Defaults
This command has no default settings.
Command Modes
Privileged EXEC
Command History Release
12.1(8a)EW
Examples
This example shows how to display QoS map settings:
Switch# show qos maps
DSCP-TxQueue Mapping Table (dscp = d1d2)
d1 :d2
-------------------------------------
0 :
1 :
2 :
3 :
4 :
5 :
6 :
Policed DSCP Mapping Table (dscp = d1d2)
d1 :d2
-------------------------------------
0 :
1 :
2 :
3 :
4 :
5 :
6 :
78-16201-01
show qos maps [cos | dscp [policed | tx-queue]]
(Optional) Displays CoS map information.
(Optional) Displays DSCP map information.
(Optional) Displays policed map information.
(Optional) Displays tx-queue map information.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
0 1 2 3 4 5 6
01 01 01 01 01 01 01 01 01 01
01 01 01 01 01 01 02 02 02 02
02 02 02 02 02 02 02 02 02 02
02 02 03 03 03 03 03 03 03 03
03 03 03 03 03 03 03 03 04 04
04 04 04 04 04 04 04 04 04 04
04 04 04 04
0 1 2 3 4 5 6
00 01 02 03 04 05 06 07 08 09
10 11 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29
30 31 32 33 34 35 36 37 38 39
40 41 42 43 44 45 46 47 48 49
50 51 52 53 54 55 56 57 58 59
60 61 62 63
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
7 8 9
7 8 9
show qos maps
2-371