Configuring Class-Default Port-Shaper Policy Maps - Cisco ASR 900 Series Configuration Manual

Port-Shaper and LLQ in the Presence of EFPs

Configuring Class-default Port-Shaper Policy Maps

To configure hierarchical policy maps, first create the child policies and then attach it to a parent policy. The
parent policy must be attached to an interface.
SUMMARY STEPS
1. enable
2. configure terminal
3. policy-map policy-map-name
4. class class-default
5. shape-average shape-value
6. exit
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Device> enable
Step 2 configure terminal
Example:
Device# configure terminal
Step 3
policy-map policy-map-name
Example:
Device(config)# policy-map child-llq
Step 4 class class-default
Example:
Device(config-pmap)# class class-default
Enables privileged EXEC mode.
Enters global configuration mode.
Creates or modifies the child policy and enters QoS policy-map
configuration mode.
Configures or modifies the parent class-default class and enters
QoS policy-map class configuration mode.
QoS: Policing and Shaping Configuration Guide, Cisco IOS XE Release 3S (Cisco ASR 900 Series)
Configuring Class-default Port-Shaper Policy Maps
Purpose
• Enter your password if prompted.
• child-llq is the name of the child policy map.
• You can configure only the class-default class in a parent
policy. Do not configure any other traffic class.
25