How To Implement Cdp On Cisco Ios Xr Software; Enabling Cdp; Modifying Cdp Default Settings - Cisco NCS 5000 Series Manual

Implementing CDP

How to Implement CDP on Cisco IOS XR Software

Enabling CDP

To enable CDP, you must first enable CDP globally on the router and then enable CDP on a per-interface
basis. This task explains how to enable CDP globally on the router and then enable CDP on an interface.
SUMMARY STEPS
1. configure
2. cdp
3. interface type interface-path-id
4. cdp
5. commit
DETAILED STEPS
Command or Action
Step 1
configure
Step 2 cdp
Example:
RP/0/RP0/CPU0:router# cdp
Step 3 interface type interface-path-id
Example:
RP/0/RP0/CPU0:router# int TenGigE 0/5/0/11/1
Step 4
cdp
Example:
RP/0/RP0/CPU0:router(config-if)# int TenGigE 0/5/0/11/1
Step 5 commit

Modifying CDP Default Settings

This task explains how to modify the default version, hold-time setting, and timer settings.
System Management Configuration Guide for Cisco NCS 5000 Series Routers, IOS XR Release 6.2.x
How to Implement CDP on Cisco IOS XR Software
Purpose
Enables CDP globally.
Enters interface configuration mode.
Enables CDP on an interface.
59