Getting Started - Cisco 1941W Configuration Manual

Chapter Overview of the Hardware and Software

Getting Started

See the router-specific hardware installation guide to install the router in an appropriate location.
Connect the router with the appropriate cables. Supply power to the router and perform the initial
software configuration using Cisco Configuration Professional Express. After the initial configuration
is completed, perform the following steps:
Follow instructions in the
Step 1
configurations.
(Optional) If you are setting up the Cisco 1941W ISR, follow instructions in the
Step 2
Wireless Device" section on page 247
Step 3 Follow instructions in the
features on the router.
Step 4 Follow instructions in the
page 169
Cisco 3900 Series, Cisco 2900 Series, and Cisco 1900 Series Integrated Services Routers Generation 2 Software Configuration Guide
"Basic Router Configuration" section on page 13
"Configuring Security Features" section on page 127
"Unified Communications on Cisco Integrated Services Routers" section on
to configure Voice features on the router.
to configure the embedded wireless device on the router.
Getting Started
to perform additional router
"Configuring the
to configure security
7