Getting Started With The Configuration - Cisco CVR100W Quick Start Manual

Getting Started with the Configuration

4
The Setup Wizard and web-based Configuration Utility are supported on
Microsoft Internet Explorer 6.0 or later, Mozilla Firefox 3.0 or later, Apple
Safari 3.0 or later, and Google Chrome 5.0 or later.
To log in to web-based Configuration Utility and complete the initial
configuration by using the Setup Wizard:
Connect a PC to an available LAN port on the back panel and power
S 1
TEP
on the PC. Your PC will become a DHCP client of the CVR100W.
Start a web browser. In the address bar, enter the default IP
S 2
TEP
address of the CVR100W: 192.168.1.1.
If the default IP address of the CVR100W conflicts with
N
OTE
another device (such as ADSL modem or cable modem) on the
same network, its default IP address will be automatically changed
to 10.10.10.1. You must use the new default IP address to log in to
the utility when IP address conflict occurs.
When the login page appears, choose the language that you prefer
S 3
TEP
to use in the utility and enter the username and password.
The default username is cisco. The default password is cisco.
Usernames and passwords are case sensitive.
Click Log In. The Setup Wizard will now launch.
S 4
TEP
Follow the on-screen prompts to complete the initial configuration.
S 5
TEP
For security purposes, change the default password as instructed
by the Setup Wizard to prevent unauthorized access.
After the initial configuration is complete, go to the Advanced
Settings pages to configure other advanced features. You are
required to log in to the utility again with the new password. See
the help pages or the Cisco CVR100W Wireless-N VPN Router
Administration Guide for more information on configuring the
advanced features.
6 Cisco CVR100W Wireless-N VPN Router Quick Start Guide