Dr Mode Scan And Call Channel - Icom ID-31A Advanced Instructions

Previous view

■ DR MODE SCAN AND CALL CHANNEL

Checks the Call channel (priority channel) every 5 sec-
onds, during a DR mode scan.
Push [M/CALL]
q
mode.
Hold down [DR]
w
mode.
Hold down [SCAN]
e
• The DR scan starts.
Push
.
r
Push D-pad( ) to select "PRIO Watch," and then
t
push D-pad(Ent).
• ON : When a signal is received on the priority
channel, the Call channel mode is auto-
matically selected.
• Bell : When a signal is received on the priority
channel, a beep sounds and the "PRIO"
icon blinks on the DR mode screen.
D-pad
(Ent)
(�)
Push D-pad( ) to select "ON" or "Bell," and then
y
push D-pad(Ent).
• The "PRIO" icon is displayed and the priority scan
starts.
• Regardless of the scan setting, when a signal is re-
ceived during a DR scan, the transceiver continues to
check the Call channel every 5 seconds.
• Push [CLR]
mode scan.
to select the Call channel
for 1 second to select the DR
for 1 second.
to cancel the priority scan and DR
Example: Checks Call channel "CO" every 5 seconds,
during the DR mode scan.
The DR mode scan starts.
Blinks
Appears
Blinks
During the DR mode scan.
9-29
PRIORITY WATCH
Hold down [DR] for 1 sec-
ond.
Hold down [SCAN]
for 1 second.
Push .
Appears
Checks the Call chan-
nel every 5 seconds.
(Continued on page 9-30.)
9
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21