Other Functions; Using The Dtmf Memory; Ddtmf Code Programming - Icom ID-31A Advanced Instructions

Previous view
11

OTHER FUNCTIONS

■ Using the DTMF memory

The transceiver can stores up to 16 channels of DTMF
memory with 24-digit DTMF code.
D DTMF code programming
Push [MENU]
q
To display the DTMF MEMORY screen, push
w
D-pad( ) to select the root item (DTMF/T-CALL),

and then push D-pad(Ent) to go to the next level.
• DTMF memory channel list (d0 to d#) is displayed.
D-pad
(Ent)
(�)
Push D-pad( ) to select the desired DTMF memory
e

channel, then push
Push D-pad( ) to select "Edit, "then push D-pad(Ent)
r

to enter DTMF memory edit mode.
Rotate [DIAL] to select the desired code, the push
t
D-pad(Ent) to set the code.
Repeat the above step to enter the desired DTMF
codes.
• Push to move the cursor backward, or push
move the cursor forward.
* When the cursor is on the 24th digit, the cursor only can
be move to backward.
• Push [CLR]
• When the cursor does not select a character, the previ-
ous character is deleted.
If [CLR] is held down, all the characters are de-
leted.
When all digits are set, push D-pad(Ent).
y
• The entered DTMF codes are stored into the DTMF
memory channel, and automatically return to DTMF
memory screen.
u Push [MENU]
to select the MENU list screen.
.
to delete the selected code.
to return to the operating screen.
[DIAL]
Example: Stores the DTMF code, "012345" into the
DTMF memory channel "d0."
to
DTMF memory edit mode
Cursor
11-2
Push
In case of a DTMF code
has been stored
Rotate [DIAL] to select the
desired code
Blinks (during character select)
Push D-pad(Ent)
Push [MENU]
Stored DTMF code