Selecting The Frequency Selecting Mode; D Vfo Mode; D Memory Mode; D Call Channel Mode - Icom ID-52A Basic Manual

■ Selecting the Frequency Selecting mode

D VFO mode

Rotate [DIAL] to set an operating frequency.
L In the VFO mode,
Memory mode
D
Select a Memory channel where an operating frequency and other parameters are saved.
L In the Memory mode,

D Call Channel mode

Select a Call Channel to recall your most-often used frequencies quickly.
L In the Call Channel mode,
Weather Channel mode (For only the ID-52A)
D
Weather Channels are used for monitoring Weather Channels from the National
Oceanographic and Atmospheric Administration (NOAA) broadcasts.
L In the Weather Channel mode,
1. Select a mode.
L Information
• Push [VFO/MHz] to select the VFO mode.
• In the VFO mode, push [VFO/MHz] to select the 1 MHz tuning step.
• Push [MR] to select the Memory mode.
• Hold down [CALL] for 1 second to select the Call Channel mode.
• For only the ID-52A, push [MR] in the Memory mode to select the Weather Channel
mode.
2. Rotate [DIAL] to select an operating frequency or a channel.
VFO mode

■ DR function operation

Using the D-STAR Repeater (DR) function, you can easily
select the entered repeaters and Your call signs by rotating
[DIAL]. You can make not only a repeater call but also a
simplex call.
Hold down [DR] for 1 second.
• Displays the DR screen.
L Hold down [DR] again to cancel the DR function.
L See D-STAR GUIDE (p. 40) for the DR function details.
is displayed.
and the Memory Channel number are displayed.
and the Call Channel number are displayed.
is displayed.
Memory mode
BASIC OPERATION
Call Channel
mode
3
Weather Channel
mode
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
14