Icom ID-31A Advanced Instructions page 90

Previous view
2. GPS Memory name programming
y Push D-pad() to select "NAME."
D-pad
(Ent)
(�)
u Push D-pad(Ent), then the editing screen appears.
i Rotate [DIAL] to select the first character.
• The selected character blinks.
• Push D-pad() to move the cursor right or left.
• While selecting a character, push
character to a upper case or lower case letter.
• While selecting a digit, push
selection window.
Push D-pad() to select the desired modes to Upper
case letters, Lower case letters, Numbers and Symbols.
To enter symbols, select "!"#," and then push D-pad(Ent)
to display the symbol character selection window. And
rotate [DIAL] to select the desired symbol character, and
then push D-pad(Ent).
• A space can be selected, even for any input mode se-
lected.
• Push D-pad(") to enter a space to the right of the last
character.
To insert a space to the left of any selected character,
rotate [DIAL] to select a space to insert it.
• Push [CLR]
down [CLR]
after the cursor.
o Push D-pad(") to move the cursor to the second
digit.
!0 Repeat steps i and o to enter a GPS Memory
name of up to 16 characters, including spaces.
!1 After entering the name, push D-pad(Ent).
(Continued on the next page)
to change the
to open the input mode
to erase the selected character, or hold
to continuously erase the characters
GPS/GPS-A OPERATION
5-9
5
Character
type selection
screen
5
(Example)
When entering
"HOUSE."