Icom ID-31A Advanced Instructions page 2

Previous view
INTRODUCTION
About this Advanced Instructions (PDF format)
These Advanced Instructions describe the details of the ID-31A/E's features. And, this PDF formatted manual pro-
vides you with convenient functions, as follows.
Move to the previously read page.
Click [Previous view] at the left top on an each page, to
move back to the previously read page.
Shows a term description
When the mouse cursor is moved over a term which
is highlighted in yellow, the description of term is dis-
played.
Shows the location of keys
When the cursor is moved over a term with a red un-
derline, a red circle appears around the appropriate
key(s) on the figure of transceiver.
Example: When the cursor is moved over "D-pad()" in
the description, a red circle appears around
the appropriate key(s).
The screen shots at the right column, correspond to
the operating instructions and procedures shows both
setting and operating example.
Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in Japan, the United States, the
United Kingdom, Germany, France, Spain, Russia and/or other countries.
APRS is registered trademark of Mr. Bob Bruninga (WB4APR).
Adobe and Adobe Reader are registered trademark of Adobe Systems Incorporated.
All other products or brands are registered trademarks or trademarks of their respective holders.
Previous view
8
SCAN OPERATION
D
A memory bank scan searches through the memory
channels in the selected bank.
as skip channels, must be programmed into start a
program scan.
"OFF," a bank scan is not started.
q to select the memory mode.
for 1 second.
w
Push D-pad ( ) to select the scan type.
e
( Only banks which contain a memory
channel are displayed.)
(For the duplex mode)
(For tone scanning)
D-pad
(Ent)
( )
Push D-pad(Ent) to start the scan.
r
t
1 second.
also cancels the scan.
lects the scan type. The scan immediately starts
is released.
NOTICE
"SKIP" or "PSKIP" is skipped.
which are set as "SKIP" or "PSKIP," the scan is not
started.
i
-
ond.
Push D-pad(Ent).
Blinks
Blinks
When a signal is received.
Blinks
Bank channel
Stops blinking
for
The S-meter shows the re-
ceived signal strength.
-
8-8