Icom ID-31A Advanced Instructions page 161

Previous view
9
PRIORITY WATCH
VFO FREQUENCY AND CALL CHANNEL (Continued)
■
When a signal is received.
• When "ON" is selected.
When a signal is received on the priority channel,
the Call channel mode is automatically selected.
The "PRIO" icon blinks.
* The scan pause timer and resume settings are the
same as for a normal scan.
• When "Bell" is selected.
When a signal is received on the priority channel, a
beep sounds and the "
screen.
" icon is displayed on the
Automatically changes to the Call channel mode.
Remains in the VFO mode.
9-8
Blinks
Blinks