Icom ID-31A Advanced Instructions page 39

Previous view
3
DR MODE <BASIC>
For your reference (Continued)
■
D Making a Local Area call or a Gateway call in the VFO mode
Besides the DR mode, you can use the VFO mode,
Memory mode or Call channel mode to make DV
calls.
1. Access Repeater settings (R1)
Push [V/MHz]
q
Push [FM/DV]
w
DV mode.
Set the access repeater's transmit frequency, du-
e
plex direction and frequency offset. (pp. 23, 30, 33
on the printed manual)
Hold down for 1 second to display the CALL
r
SIGN screen.
Push D-pad( ) to select "R1," and then push
t 
Push D-pad( ) to select "Edit."
y 
Push D-pad(Ent) to enter the call sign programming
u
mode.
• A cursor appears and blinks.
D-pad
(Ent)
(�)
Rotate [DIAL] to select the first digit. (Example: J)
i
• A to Z, 0 to 9, / and a space can be selected.
• If you make a mistake, push [CLR]
selected character.
• Push D-pad(") to enter a space.
• Push D-pad() to move the cursor left or right.
Push D-pad( ) to move the cursor to second digit.
o
"
!0 Repeat steps i and o to enter a repeater call sign
of up to 8 characters, including spaces.
(For example: First, J, then P, then 1, then Y, then D,
then G)
!1 Push D-pad(Ent).
to select the VFO mode.
one or more times to select the
to delete the
.
"R1" setting is completed
for a Gateway call.
3-22
Select
Set
Select
Select