Vfo Scan And Bank Scan - Icom ID-31A Advanced Instructions

Previous view

■ VFO SCAN AND BANK SCAN

Checks the bank channels (priority channel) every 5
seconds, in sequence, during a VFO scan.
Push [M/CALL]
q
Push .
w
Push D-pad( ) to select "Bank Select," and then
e
push D-pad(Ent).
• The list of banks is displayed.
D-pad
(Ent)
(�)
Push D-pad( ) to select the bank, and then push
r
D-pad(Ent).
Hold down [SCAN]
t
Push D-pad( ) to select the scan type, and then
y
push D-pad(Ent) to start the bank scan (p. 8-8).
Push .
u
Push D-pad( ) to select "PRIO Watch," and then
i
push D-pad(Ent).
• ON : When a signal is received on the prior-
ity channel, the memory bank mode is
automatically selected.
• Bell : When a signal is received on the prior-
ity channel, the "
in the VFO mode.
Push D-pad( ) to select "ON" or "Bell," and then
o
push D-pad(Ent).
• The "PRIO" icon appears and the priority scan
(VFO frequency and bank scan) (p. 9-15) starts.
!0 Hold down [SCAN]
!1 Push D-pad() to select the scan type, and then
push D-pad(Ent) to start the VFO scan (p. 8-4).
• Push [CLR]
scan.
to select the memory mode.
for 1 second.
" icon is displayed
for 1 second.
to cancel the priority scan and VFO
Example: Checks the bank channels every 5 seconds,
in sequence, during the VFO scan.
The bank scan starts.
Appears
9-21
PRIORITY WATCH
Push .
Hold down [SCAN]
for 1 second.
Push .
Blinks
Blinks
Hold down [SCAN]
for 1 second.
(Continued on page 9-22.)
9
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21