Using A Microsd Card; About The Microsd Card; Saving Data Onto The Microsd Card - Icom ID-31A Advanced Instructions

Previous view
12

USING A MICROSD CARD

■ About the microSD card

The microSD and microSDHC cards are not available
from Icom. Purchase locally.
A microSD card of up to 2 GB or a microSDHC of up to
32 GB, can be used with the ID-31A/E.
Icom has checked the operation with the following mi-
croSD and microSDHC cards.
(As of January 2014)
Brand
®
SanDisk microSD
microSDHC
* Through the rest of this document, the microSD card and a
microSDHC card are simply called microSD cards.
* Icom recommends that you format all microSD cards to be
used with the ID-31A/E, even preformatted microSD cards
for PCs or other uses.
NOTE:
• Read the instructions of the microSD card thor-
oughly before use.
• NEVER remove the microSD card, detach the
battery pack/case, or power OFF the transceiver,
while reading or writing data to or from the microSD
card, or during cloning. It will cause the data to be
corrupted or damage the card.
• NEVER drop, or apply vibration or impact to the
microSD card. This will cause the data to be cor-
rupted or damage the card.
• The microSD card will get warm if used continu-
ously for a long period of time.
• A microSD card has a certain lifetime, so data
reading or writing will not be possible when using
it over a long time period.
• Icom will not be responsible for any damage caused
by data corruption of a microSD card.
Type Memory size
2 GB
4 GB
8 GB
16 GB
32 GB
■ Saving data onto the microSD
card
The following data can be stored onto the card:
• Data settings of the transceiver
Memory channel contents, and repeater lists stored in
the transceiver
• Communication contents
Received communication activity (audio)
• Automatic answering voice audio for the DV mode
Voice audio to use with the Auto Reply function in the
DV Mode
• Position data from the GPS receiver
Position and time data from a GPS receiver, that is in
a log file as a route
12-2