Icom ID-31A Advanced Instructions page 179

Previous view
9
PRIORITY WATCH
DR MODE SCAN AND VFO FREQUENCY (Continued)
■
When a signal is received.
• When "ON" is selected.
When a signal is received on the priority channel,
the VFO mode is automatically selected. The "PRIO"
icon blinks.
Push [CLR]
it again to cancel the scan.
* The scan pause timer and resume settings are the
same as for a normal scan.
• When "Bell" is selected.
When a signal is received on the priority channel,
a beep sounds and the "PRIO" icon blinks. The DR
mode scan resumes.
to resume the priority scan. Push
Automatically changes to the VFO mode.
Blinks
9-26
Blinks
Blinks
Resumes in the DR mode.