Previous view
Cloning function
■
D
Transceiver-to-Transceiver cloning using a microSD card (Continued)
!2 To display the File load screen, push D-pad() to
select the desired setting file, and then push D-
pad(Ent).
D-pad
(Ent)
(�)
!3 Push D-pad() to select the desired loading con-
tent, as shown below.
• ALL:
• Except My Station:
• Repeater List Only: Loads only the repeater list into
!4 Push D-pad(Ent).
• The "Keep 'SKIP' setting in Repeater List?" appears.
!5 Push D-pad() to select "YES" or "No."
• When "Yes" is selected, the skip setting (p. 4-32) of the
repeater list is retained.
!6 Push D-pad(Ent), "Load file?" appears.
!7 Push D-pad() to select "Yes," then push D-pad(Ent)
to start the file check.
• While checking the file, "FILE CHECKING" and a prog-
ress bar are displayed.
!8 After checking, settings data loading starts.
• While loading, "LOADING" and a progress bar are dis-
played.
!9 After loading, "COMPLETED!" appears.
To complete the loaded, reboot the transceiver.
Loads all memory channels, item
settings in the menu list and the
repeater list into the transceiver.
Loads all memory channels, item
settings in the menu list except
MY call signs and the repeater
list into the transceiver.
the transceiver.
Reboot the transceiver to com-
plete the cloning/data loading.
11-13
11
OTHER FUNCTIONS
Selecting the file which is
saved by the master trans-
ceiver.
Select
"ALL" when
memory channels, MENU
item settings and repeater
list to be copied.
all
11