Vfo Scan And Bank Channel - Icom ID-31A Advanced Instructions

Previous view

■ VFO SCAN AND BANK CHANNEL

Checks the selected bank channel (priority channel),
during a VFO scan.
Push [M/CALL]
q
Push .
w
Push D-pad( ) to select "Bank Select," and then
e
push D-pad(Ent).
• The list of banks is displayed.
D-pad
(Ent)
(�)
Push D-pad( ) to select the bank that contains the
r
channel to watch, and then push D-pad(Ent).
Rotate [DIAL] to select the bank channel to watch.
t
Push [V/MHz]
y
Push [FM/DV]
u
Hold down [SCAN]
i
Push D-pad( ) to select the scan type, and then
o
push D-pad(Ent) to start the VFO scan (p. 8-4).
!0 Push .
!1 Push D-pad() to select "PRIO Watch," and then
push D-pad(Ent).
• ON : When a signal is received on the prior-
ity channel, the memory bank mode is
automatically selected.
• Bell : When a signal is received on the prior-
ity channel, the "
in the VFO mode.
!2 Push D-pad() to select "ON" or "Bell," and then
push D-pad(Ent).
• The "PRIO" icon is displayed and the priority scan
starts.
• Regardless of the scan setting, when a signal is re-
ceived during the scan, the transceiver continues to
check the bank channel every 5 seconds.
• Push [CLR]
scan.
to select the memory mode.
to select the VFO mode.
to select the receive mode.
for 1 second.
" icon is displayed
to cancel the priority scan and VFO
[DIAL]
Example: Checks bank channel "Z98" every 5 seconds,
during a VFO scan.
The VFO scan starts.
Appears
Blinks
During a VFO scan
Blinks
9-11
PRIORITY WATCH
Push .
Push [V/MHz] .
Hold down [SCAN]
for 1 second.
Push .
Blinks
Blinks
Appears
Checks the bank chan-
nel every 5 seconds.
(Continued on page 9-12.)
9
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21