Dr Mode <Advanced - Icom ID-31A Advanced Instructions

Previous view
4
DR MODE <ADVANCED>
Repeater list programming (Continued)
■
2. Repeater name programming
u Push D-pad( ) to select "NAME," and then push D-

pad(Ent) to enter the repeater name edit mode.
i Rotate [DIAL] to select a desired character.
• The selected character blinks.
• Push D-pad() to move the cursor right or left.
• While selecting a character, push
character to a upper case or lower case letter.
• While selecting a digit, push
selection window.
• A space can be selected, even for any input mode se-
lected.
• Push [CLR]
down [CLR]
after the cursor.
• See page 4-2 for programming details.
o Push D-pad(") to move the cursor to the second
digit.
!0 Repeat steps i and o to enter a name of up to 16
characters, including spaces.
!1 After entering the name, push D-pad(Ent).
3. Repeater sub name programming
!2 Push D-pad( ) to select "SUB NAME," and then

push D-pad(Ent) to enter the repeater sub name
edit mode.
!3 Rotate [DIAL] to select a desired character.
• The selected character blinks.
• Push D-pad() to move the cursor right or left.
• While selecting a character, push
character to a upper case or lower case letter.
• While selecting a digit, push
selection window.
• A space can be selected, even for any input mode se-
lected.
• Push [CLR]
down [CLR]
after the cursor.
• See page 4-2 for programming details.
!4 Push D-pad(") to move the cursor to the second
digit.
!5 Repeat steps !3 and !4 to enter a sub name of up to
8 characters, including spaces.
!6 After entering the name, push D-pad(Ent).
to change the
to open the input mode
to erase the selected character, or hold
to continuously erase the characters
to change the
to open the input mode
to erase the selected character, or hold
to continuously erase the characters
4-22
Character type
selection screen
Example:
"East Tokyo" is
entered.
Character type
selection screen
Example:
"Japan" is en-
tered.